DEMO MODE (Mock Telemetry)
Hardware Advisory: Running in Demo Shell Mode. Telemetry shown is simulated for interface verification until live ESP32 DevKit V1 telemetry is received by the backend.
Backend Configuration Status →

System OverviewDEMO DATA

Live status, sensor telemetry, and actuator states for Smart Farm Unit #1.

Actuator ControlsSensor Details
Soil Moisture (Raw ADC)GPIO34
2840/ 4095 ADC
Status: AdequateUncalibrated
Reservoir Water LevelGPIO35
1950/ 4095 ADC
Safe LevelInterlock: OK
DHT11 ClimateGPIO27
24.8°C

Air Temp

62%

Rel Humidity

Optimal rangeDHT11 Single-Bus
Ambient Light (LDR)GPIO32
1420/ 4095 ADC
Daylight ModePhotoresistor

HW-316 Relay Module Status

Active-Low opto-isolated relay channels. Safe OFF on power reset.

Control Center
IN1: PumpGPIO18
DE-ENERGIZED

Irrigation Submersible

IN2: Farm LEDGPIO19
DE-ENERGIZED

Grow Light Illuminator

IN3: BuzzerGPIO21
SILENT

Acoustic Alert

IN4: SpareGPIO22
SPARE (OFF)

Unused / Reserved

Security & Field Vision

PIR Motion DetectorGPIO26
CLEAR / NO MOTIONPending Wiring Test

PIR module is configured for GPIO26. Awaiting final field bench testing.

ESP32-CAM ModuleSeparate Wi-Fi
Stream Status:Not Commissioned
Open Camera View & Settings →
Target Device: ESP32 DevKit V1 (ESP32-AGRI-01)•Firmware: v1.0.0
Wi-Fi RSSI: -67 dBmUptime: 0h 0m 0sTelemetry: Simulated (Demo)